This new model from Farmhand is an improvement on other electric cordless debudders. It is supplied complete with all components in a sturdy carry case, Charging time is about 8 hours. The device is supplied with 16mm tip attached. Spare 18mm and 20mm tips are also supplied. (Changing tips requires small tools and some minutes.) To use debudder switch on. A loud beep, and a series of lights indicates power is on. Then simply press side button to activate. Tip element will be glowing red hot in seconds. Apply directly to horn bud to burn a continuous ring through the outer horn layers of the bud. The light series on the body indicate power left in the battery. The plastic tip cap can be applied over hot or cold tip. Supplied complete with regular 240v charger, and also 12v vehicle charge lead. Instructions included._x000D_
NB: This is our fastest-heating and hottest debudder, reaching 700�C in 8 seconds.
213 702
$349.00 inc. GST
The Portasol debudder has now had an upgrade to a MK3 model. This is a completely new tool, made much stronger and more durable, and with improved heat retaining properties. Ignition is improved with a new Piezo starter, and there is also the very valuable option of manual lighting when required. The jet can be removed and serviced by the user. This new tool is a top quality debudder that should last many years of use. NB: The debudder is charged with butane lighter fuel when it is dispatched. Due to freight regulations we can not include a refill-can with the debudder.
201 746
$599.00 inc. GST
201 747
$49.95 inc. GST
This dudder is made in New Zealand and has been well proven over many years of use. It is a very robust tool, suitable for use in demanding conditions. Supplied with POL fitting for direct connection to regular 4kg or 9kg LPG bottles. Gas control is by the handle knob, so a regulator is not required on the bottle. A 2.5m-long hose is included. Supplied standard with 18mm tip, with optional 16mm and 20mmn tips available. The heavy tip on this dubudder means it will hold its heat well whilst in contact with the horn.
The Express Butane Belt-Pack makes debudding most convenient when doing more than just a few calves. The kit includes a belt hook which enables the butane can to be belt hung. This makes the debudder handle much more convenient to use. All parts are common to all Express Debudders. **This tip is reversible
201 719
$32.95 inc. GST
201 720
$145.00 inc. GST
209 399
$139.00 inc. GST
Barnes dehorners offer a simple dehorning solution for calves up to about 15 months old. They are a low-cost tool used to scoop out the whole horn bud, ideally also with a ring of hair at the base to ensure prevention of regrowth. Use 32cm tool for calves up to eight months, and 42cm tool for calves up to 15 months. Our economy dehorners are quite adequate for the task, but the quality versions are from Stone Mfg, USA, and feature concentric jaws which cut cleanly all around, without clashing. The quality tools also feature Rockwell 45-standard hardened jaws to retain their cutting edge for life. The stainless steel tool has the advantage of resistance to corrosion. Even the hinge rivet is stainless. Features as for quality range.
210 458
$199.00 inc. GST
This is a quality 240v tool with good power output. Ergonomic grip design. Heat to 570°C operating temperature in 10 minutes. A feature of this debudder is the close proximity of the element to the tip ensuring best maintenance of heat output in all conditions. Tips are of stainless steel for long life. The Kerbl debudder is supplied with a stainless steel stand for resting the device on during heating and between uses.
201 728
$279.00 inc. GST
This German-manufactured 240v tool is of highest quality manufacture with an extremely robust element. 620°C temperature at 10 minutes. The handle design incorporates a flat top area to give an easy pad for hand pressure, without damaging the cord, and also a wire stand to rest the hot iron on during use.
214 574
$599.00 inc. GST
This SAMS debudder uses a transformer to reduce -->240v mains power to a safe and powerful 24v debudding tool. Reaches operating temperature of 580°C in 15 minutes. This tool has been used by some of our large-scale rearer clients and proven to be powerful and reliable in all conditions. It is supplied with a 2m lead to the transformer, and then a 4m heavy-duty power lead to the debudder. This ensures full power is supplied to the debudder in all conditions, even when used with an inverter, generator, or extension lead. We strongly recommend this tool for larger-scale operations wanting the convenience of electric debudding.
213 689
$499.00 inc. GST
This tool from Germany is our premium gas debudder. Ideal for the large-scale calf rearer. It is supplied in a sturdy metal carrying case, complete with two 110ml cans of liquid gas. Each can should give up to two hours of operation. Cans are simply screwed into the GasBuddex handle. Lighting is by a press-button piezo igniter. Gas flow is controlled with a rotating knob. Operating temperature of 650°C is reached in 2-3 minutes. The debudder is supplied with a spare jet and seal ring, along with Allen keys for fitting. Length 31cm overall. Weight 900gm.