Focus on Identification
Branding Set cpt- this comprises boxed set of dry-ice gun, delivery hose, operation manual and 0-9 digit set. Specify 2 inch, 3 inch, 4 inch. **Please note, complete sets do NOT include the hanging organiser pictured above.
FIL Tell Tail Paint aerosols can be used as tail paint, or as very good general purpose stock markers particularly suitable for cattle (not for use on wool). Colours are fluoro, and are highly visible and will usually last up to four weeks, even in wet weather. So as well as being genuine tail paints for mating identification, they are also ideal for warning marks in the dairy. Another great feature with FIL is that the can empties its full contents, even if used horizontally. One can will do 40-50 average tail marks. Net contents 500ml.
FIL<0x2008>Tell Tail is the original tail paint applicator product. Just pull off the sealing cap and lightly squeeze the bottle. Paint is oil-based. The plastic bottles do not flatten out, even after repeated use. Replace the cap after each usage. (To keep the brush head in top condition, apply a little vaseline inside the cap, to keep air out).
Stainless-steel brands are most suitable for heat branding, but can also be used for freeze branding. Nine-piece set. (6 & 9 interchange.)
A 3/8� tattoo digit is suitable for all animals, sheep or cattle. It produces a digit 10mm tall. Six and 8 place pliers have digits in two rows of 3 and 4 places. For 6 and 8 place special blocks, order two x 3 or 4 place blocks. To identify if your tattoo plier is Short Pin or Long Pin, look for an �S� or an �L� stamped on the inside of one handle.
Our new Farmhand branding furnace follows on from the traditional design of these devices, but with some improvements for ease of use. The one-piece snap-in legs are firm and stable, and the one-piece handle-frame and brands-rest snaps into place. The all-steel furnace body is lined with a special cement-based �fire-brick� product to retain and reflect maximum heat. (The burning chamber is filled with styrene to protect the fire-brick in transit. This must be removed before use.) The fire brick refractory can be replaced (see below). Instructions are included. All parts are interchangeable with traditional furnaces. This furnace has a 30cm brands opening, and a single gas burner. Can heat two numbers and a 3-piece brand together.
Copper-alloy brands are suitable for freeze branding only. Nine-piece set. (6 & 9 interchange.)
Stainless-steel brands for heat branding. But can be used for freeze branding if required (with possibly less-perfect results). Full ten-piece set.
Put notches in animal�??s ears at a young age for permanent number or ownership ID. Five shapes as pictured. Notches 15mm deep x 5mm wide at base. Stainless steel, good quality. Length 16cm o.a.