Milk Preparation

204 616
$595.00 inc. GST
204 618
$695.00 inc. GST
There is no doubt calves do better on warm milk. Our 240v Milk Warmer uses a 2000W element encased in alloy for immersing in milk, or any liquid, to a maximum 70cm depth. For deeper containers, and plastic bottom containers, machine must be suspended or stood on a suitable stand. (Do not suspend warmer by the handles - see our suspension devices below.) Our Teflon-coated model reduces the tedious task of cleaning milk from the element area. Rheostat Controlled.
These Milk Warmers will heat 100 litres of milk from 17°C to 37°C in approx 1 hour. Lift out and rinse off. For warming large volumes (trailers etc) we suggest you use a standard electric plug timer, set for required time before feeding. Milk will be warm when you are ready to go.
NB: Rubbing cooking oil into the element before using will help reduce milk deposits. If used for heating colostrum, you must thin milk with warm water, or stir frequently to prevent build up on element.
215 695
$255.00 inc. GST
Warming milk or colostrum for feeding to calves is a necessary and well accepted practice. But a problem with most conventional milk warmers is the buildup of milk solids on the heating element. This acts as an insulation-barrier, causing great inefficiency in heat transfer. The Shoof development team have come up with a practical solution. Our all-stainless heat exchanger is filled with warm or cold water. It is then placed into the full milk container. The heat exchanger takes up to 25 litres of water. Short legs keep the exchanger off the bottom, and handles can also serve as suspension 'hooks' (see photo above). Dimensions are diameter and height overall.
NB: Milk still must be stirred from time-to-time to heat efficiently. Water temperatures over 55°C can create fat buildup on the exchanger. The heat exchanger heats more slowly than direct immersion of milk warmer, but eliminates most tedious cleaning and risk of element failure.
213 925
$49.95 inc. GST
Used in a cordless drill, this mixer is fast and efficient. When spun-up the wire loops spread out and beat powder lumps smooth in seconds. This whisk is ideal for deep containers, such as 200-litre drums. All stainless steel. Length 89cm o.a.
204 605
$19.95 inc. GST
For smaller containers put this mixer in your electric drill for a fast mix. Nifty little knob on top is to hang it up (remove to fit in drill). All galvanised steel. Length 63cm o.a. Disc dia 10cm.
204 606
$49.95 inc. GST
Simple traditional plunger makes quick work of mixing milk powder in larger containers. All galvanised steel. Length 100cm o.a. Disc dia 17cm.
All stainless steel very efficient milk powder mixers. Length 110cm o.a. Disc dia 22cm.
204 612
$32.95 inc. GST
204 613
$45.95 inc. GST
Made of stainless steel. Fastest cleanest method yet for mixing smaller quantities of powdered milk. Dimension is length o.a.
207 524
$44.95 inc. GST
204 620
$89.95 inc. GST
When warming milk in large containers the warmer can require suspension off the bottom. We have two devices for this purpose:
Suspension Bar: (see above) simple aluminium bar which is easily clipped on and off the warmer shaft. Span to 50cm. Note: The hose clamp supplied must be used tightly on the shaft immediately under the warmer handle unit, to prevent loading the handle. (Position clip head to take load).
Suspension Kit: (see next column) a more substantial device which is clamped on to the warmer shaft.The arms swing down when not in use. All stainless steel. Span to 60cm. We recommend this one.