Dehorning

Loading...
216 017
$699.00 inc. GST

The Farmhand geared dehorner is a new development from Shoof. It has been designed to suit the high end of the dehorning market, where strength, reliability and light weight are important. The dehorner is made of all hardened steel, with Australian hardwood handles. The gear set is precision cast to create the most cutting force with the least handle effort. To aid in this the main pivot points are bronze bushed, to reduce moment loads. All parts are available. Blade opening to 80mm. Handles 70cm long. Length 122cm o.a. Weight 8kg.

High quality model from Farmhand. Fully improved model with new castings and heavy-duty hinge points. This is a higher quality tool with improved cutting efficiency. Quadrant-link mechanism for easiest cutting action. Cupped blades opening to 55mm. All stainless steel. Length 60cm o.a. Weight 2.4kg. Use this size dehorner for green horns only.
This new model from Farmhand is an improvement on other electric cordless debudders. It will debudd about 100 calves per charge, and is supplied complete with all components in a sturdy carry case, Charging time is about 8 hours. The device is supplied with 16mm tip attached. Spare 18mm and 20mm tips are also supplied. (Changing tips requires small tools and some minutes.) To use debudder, switch on. A loud beep, and a series of lights indicates power is on. Then simply press side button to activate. Tip element will be glowing red hot in seconds. Apply directly to horn bud to burn a continuous ring through the outer horn layers of the bud. The light series on the body indicate power left in the battery. The plastic tip cap can be applied over hot or cold tip. Supplied complete with regular 240v charger, and also 12v vehicle charge lead. Instructions included.
NB: This is our fastest-heating and hottest debudder, reaching 700°C in 8 seconds.
213 702
$375.00 inc. GST
The Portasol debudder has now had an upgrade to a Mk3 model. This is a completely new tool, made much stronger and more durable, and with improved heat retaining properties. Ignition is improved with a new Piezo starter, and there is also the very valuable option of manual lighting when required. The jet can be removed and serviced by the user. This new tool is a top quality debudder that should last many years of use.
201 746
$599.00 inc. GST

This debudder is made in New Zealand and has been well proven over many years of use. It is a very robust tool, suitable for use in demanding conditions. Supplied with QCC fitting for direct connection to regular 4kg or 9kg LPG bottles. Gas control is by the handle knob, so a regulator is not required on the bottle. A 2.5m-long hose is included. Supplied standard with 18mm tip, with optional 16mm and 20mmn tips available. The heavy tip on this dubudder means it will hold its heat well whilst in contact with the horn.

The Express Butane Belt-Pack makes debudding most convenient when doing more than just a few calves. The kit includes a belt hook which enables the butane can to be belt hung. This makes the debudder handle much more convenient to use. All parts are common to all Express Debudders.
*Tips are all reversible
The Express LPG debudder is for use with regular 4kg and 9kg "barbecue" gas bottles. It is supplied complete with regulator and standard POL LPG bottle fitting. This unit is ideal for commercial operators, and for debudding larger groups of calves where continuous, uninterrupted operation is important. All parts are common to all Express debudders.
**Tips are reversible
The small Convex is the ideal dehorner for use on younger stock up to about 15 months, and also for sheep and goats. The cutting action is quick and smooth, leaving a clean stump for healthiest recovery. Blade opening to 45mm. Length 79cm o.a. Weight 2.7kg. Handle 45cm o.a. supplied as each.
201 719
$35.95 inc. GST
201 720
$165.00 inc. GST
201 721
$42.95 inc. GST
These ‘Economy’ tools are quite adequate for the task. Jaws are generally from the same former, and are stretched and squeezed to fit together. Do not make a perfect cut at all times. Jaw openings (LxW): 32cm - 62mm x 33mm; 42cm - 76mm x 38mm. Dimension is overall length.
201 719
$35.95 inc. GST
201 721
$42.95 inc. GST
These ‘Economy’ tools are quite adequate for the task. Jaws are generally from the same former, and are stretched and squeezed to fit together. Do not make a perfect cut at all times. Jaw openings (LxW): 32cm - 62mm x 33mm; 42cm - 76mm x 38mm. Dimension is overall length.
201 720
$165.00 inc. GST
209 385
$259.00 inc. GST
201 722
$225.00 inc. GST
These are quality US-manufactured tools from Stone Manufacturing in USA. They feature separately-formed inner and outer jaws, which fit neatly together for a perfect cut with minimal force. The jaws are hardened to Rockwell-45 standard, for very long life. Jaw openings (LxW): 32cm - 64mm x 31mm; 42cm - 78mm x 42mm; 43cmXL - 90mm x 52mm. Dimension is overall length.
210 458
$199.00 inc. GST
This is a quality 240v tool with good power output. Ergonomic grip design. Heat to 570°C operating temperature in 10 minutes. A feature of this debudder is the close proximity of the element to the tip ensuring best maintenance of heat output in all conditions. Tips are of stainless steel for long life. The Kerbl debudder is supplied with a stainless steel stand for resting the device on during heating and between uses.