This mat uses the same proven principles as our other Hoofmats and Disinfection Mats, but is designed as a very low-cost alternative where footwear disinfection is required at the entrances to contamination-sensitive premises. The Mini-Mat features a strong mesh upper welded to an anti-bacterial PVC outer. Outer dimensions are 45cm x 45cm x 25mm depth. Liquid capacity is 3.5 litres. The mats can be used with any type of disinfection liquid, and can be supplied printed on top, to special order. To clean, place on edge, hose off, and leave to drain.
Following experience gained from development and use of our Hoofmat for cattle lameness treatment, our high quality Disinfection Mats are now in high demand around the world for human use at entrances to disease sensitive areas and establishments. These mats feature a permeable upper fabric which enables disinfection of footwear, or anything else crossing it (dogs, carts, etc.). Bottom and sides are of non-permeable material to prevent leakage or leaching of disinfection solution. Simply pour solution on top of mat to fill: 85 x 60 holds 8 litres; 85 x 85 holds 12 litres; 85 x 180 holds 25 litres. All mats are 3cm thick, with a core of bonded urethane foam. To clean, place on edge and hose off. Leave to drain. Disinfection Mats can be used with any disinfectant or sanitizer.
Here is the ideal shoe and boot disinfection mat for people who need to travel site-to-site and need a mobile disinfection facility. The foam-core mat is encased in a sturdy polyethylene box with lid. The mat can be pre-filled with solution, but will not spill, as the foam takes up all the liquid. It is then simply placed on the ground when required. No risk of spillage in a car boot or similar conveyance. Alternatively, the Mat-In-A-Box can be used at the entrance to sensitive premises and kept covered when not required. An ideal mobile disinfecting solution. Dimensions: 58cm L x 39cm W x 5cm D. Weight 4kg empty. Capacity 2.5 litres.
Use this mat for vehicle entrances to farm and disease-sensitive premises. The mat is very durable, and will withstand considerable vehicular traffic - even loaded trucks - if driven over carefully. The mat is sufficient length that all tyre sizes will make a full rotation on it. The mat is supplied in two parts that are domed together along the centre line for use. There are stainless steel eyelets in the corners for securing to the roadway if required. The road surface must be smooth under the mat. Asphalt is excellent, chip seal is acceptable if it is fine chip. If the road is coarse chip seal, or plain gravel or sand, it should be covered with plywood under the mat. To use for the first time, prepare about 40 litres of disinfectant solution in 20-litre jerry cans. Pour slowly on each side of the mat. (When the mat is new it can be slow to take in solution.) For subsequent daily or twice-daily refilling, apply 20 litres to each side of the mat, or such amount as required.
See our website:
See our website: